The High-Speed Series TLSM-370 & TLSM-590 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. Fast - 800 N·m version has a free speed of 224 rpm for rapid bolt run-down.
The High-Speed Series TLSM-738, TLSM-1000, and TLSM-1475 tools use the same 'twin motor' handle as the TLSM-370 & TLSM-590 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.
The latest extension to the High-Speed Series tool range are the TLSM-2000, TLSM-2950-1, TLSM-2950-112, TLSM-3300 ,and TLSM-4500. Bring the speed advantage to the twin motor handle to higher capacity PneuTorque models.
Tool models have free speed ranges from 2.6 to 224 rpm.
Square drive sizes of 3/4" or 1", and easily interchangeable.
Less than 85 dB(A) when under load.
Various weights between 9.03 and 29.32 lbs.
The control knob is locked to prevent damage to the gearbox.
Custom reaction members are available, if needed.
The Single-Speed Series is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to the respected gearbox range, sharing common torque reaction accessories with High-Speed and EvoTorque®2 tools.
The Wheel Nut series of tools were designed to meet the needs of the commercial vehicle wheel market.The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected to cope with the high frequency of use demanded by busy tyre shops.
Wheel Nut Series
The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and, when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia. Consequently, EvoTorque® 2 can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate).All EvoTorque® 2 tools are highly tolerant of supply voltage and frequency variation. When the tool runs, it will run accurately.If the supply voltage is outside of tolerance then, as a safety feature, the tool will be prevented from starting.
The EvoTorque® 2 has the ability to memorize multiple targets, work IDs, user IDs and readings. The tool has three modes of operation: Torque, Torque and Angle and Torque Audit. The unique Audit Mode is a sophisticated feature for testing pre-tightened bolts with minimal impact on the original fastening torque and can provide quality control data for monitoring joint performance over time.
EVOTORQUE 2 SERIES
EVOTORQUE BATTERY TOOL (EBT)
The EvoTorque® Battery Tool (EBT) features a new brushless motor, data memory and data transfer capabilities. Combined this with their respected gearboxes to deliver a range of fast, reliable, accurate battery torque tools